ILaser eWelded 450mm Undercut Segments Turbo Rim Diamond Blade
ILaser eWelded 450mm Undercut Segments Turbo Rim Diamond Blade
Inkcazo
| Inkqubo: | ILaser iWelded | Ibakala elisemgangathweni: | Umgangatho ophezulu |
|---|---|---|---|
| Ububanzi: | 12″, 14″, 16″, 18″, 20″, 24″ | Ubungakanani: | 300mm, 350mm, 400mm, 450mm, 500mm, 600mm |
| Umngxuma ongaphakathi: | 1″-20mm | Umbala: | Lungiselela |
| Umqulu: | Ibhokisi emhlophe, iBhokisi yoMbala | Uhlobo: | I-Turbo Slant yeDayimani eSetyhula yeSaw Blade |
| Ukukhanya okuphezulu: | 450mm Undercut Turbo Rim Diamond Blade, 450mm Undercut Turbo Rim Diamond Blades, I-Undercut Turbo Rim Diamond Blade | ||
I-300-600mm yePremium yeLaser eWelded Concrete Diamond Saw Blade enamaCandelo e-Turbo Undercut
1. Inkcazo yeBlade yeDayimane yeConcrete
Ukuwelda ngeLaser kuthathwa njengeyona ndlela ikhuselekileyo nekhuselekileyo yokuncamathelisa idayimani kunye nebhondi kumphetho.Amandla avela kwi-laser ayanyibilika kwaye adibanise isinyithi secandelo ledayimani kunye nentsimbi engundoqo eyenza i-weld enamandla, enokuthi ibambe amacandelo nakwiqondo lokushisa eliphezulu.Yinkqubo echaneke kakhulu, ijolise kuphela indawo yeblade edityanisiweyo kwaye ngoko ukunciphisa umngcipheko wayo nayiphi na enye indawo echatshazelwa bubushushu obukhulu obubandakanyekayo.
I-Laser welded diamond blade isetyenziswa kushishino lokwakha ikakhulu, ngakumbi ekusikeni ikhonkrithi.Enye ikhonkrithi iqulethe imivalo yensimbi, ubushushu bamacandelo edayimani bukhuphuka ngokukhawuleza xa usika imivalo yensimbi kwikhonkrithi, iinqununu ze-diamond blade zingawa, kuyingozi kakhulu kubaqhubi.
Uthotho lweSinoDiam JPCT lumgangatho weprimiyamu welaser welded segment blade eyenzelwe ukusika kwizinto ezahlukeneyo ezinzima.Ukusika ngokukhawuleza okugudileyo kunye nokutshiphuzwa okuncinci, kwaye kuqeshe amacandelo athambileyo ukuthintela ukhukuliseko lwempembelelo yombindi.
2. I-Specificaiton ye-HSGS series
| Ikhowudi # | Ububanzi (mm) | Ububanzi (Intshi) | Arbor (mm) | Arbor (Intshi) | Ububanzi beCandelo (mm) | Ububanzi beCandelo (Intshi) | Ubude beCandelo (mm) | Ubude beCandelo (Intshi) |
| JPCT12
| 300 | 12" | 25.4-20 | 1 "-20mm | 2.8 | .110" | 10 | .395” |
| JPCT14 | 350 | 14" | 25.4-20 | 1 "-20mm | 3.2 | .125" | 10 | .395" |
| JPCT16 | 400 | 16" | 25.4-20 | 1 "-20mm | 3.2 | .125" | 10 | .395" |
| IJPCT 18
| 450 | 18" | 25.4 | 1" | 3.6 | .140" | 10 | .395" |
| JPCT 20
| 500 | 20" | 25.4 | 1" | 3.6 | .140" | 10 | .395" |
| JPCT24
| 600 | 24" | 25.4 | 1" | 3.6 | .140" | 10 | .395" |
3. Umlinganiswa
- ILaser iWelded.
- Medium Hard Bond
- 10mm ubude obuhlukeneyo.
- Ukusika injongo ngokubanzi njengekhonkrithi, isitena, ibhloko, igayiva nezinye izinto zokwakha..
-
Ingasetyenziswa kwiDry and Wet.
-
Ilungele iivenkile ezirentisayo kunye neekontraka zepro.
4. Izixhobo ezicetyiswayo
- Inkulu kwiConcrete, isitena, iBhlokhi.
5. Setyenzwa
Ukusetyenziswa kwiisarha zesantya esiphezulu, iisarha zamatye kunye namandla aphantsi wehashe lokuhamba ngasemva kwesarha.
6. UMthengi ekujoliswe kuwo
Ilungele irenti okanye iikontraka zepro.
7. Amanye amanqaku
- I-Arbor inokwenziwa ngokwezifiso;
- Umbala wepeyinti unokwenziwa ngokwezifiso;
- Ileyibhile ye-Prviate inokubonelelwa;
- Iphakheji ingenziwa ngokwezifiso.
Iindidi zeemveliso
-
Imigangatho ye-15mm ye-Turbo yeSegmenti yeLaser eWelded Concr...
-
500mm 20" Konke Sika Injongo yeDayimane ngokuBanzi ...
-
10-14 Intshi ebanzi U Slots Masonry Cutting Concret...
-
ILaser eWelded uMsesane oPhakamileyo weDayimani weConcrete wabona ...
-
I-asphalt Green Concrete 300-600mm Dry Cut Diamon...
-
I-12mm eLityelweyo iSegmenti ye-Turbo eLingeneyo...
